304 and 304L are austenitic alloys. These alloys are the most familiar and frequently used alloys in the stainless steel family. The L in 304L refers to a lower carbon content to allow for a greater corrosion protection when welding. Material produced to AMS-T-6845 is suitable for use in high pressure hydraulic systems.
304/304L TUBING TO MIL-T-8504
304 and 304L are austenitic alloys. These alloys are the most familiar and frequently used alloys in the stainless steel family. The L in 304L refers to a lower carbon content to allow for a greater corrosion protection when welding.
| SKU |
Description |
Manufacture Method |
OD |
Wall |
Specification |
| 36277 |
SMLS CD 304 8504 3/8 OD X .049 WA |
SEAMLESS & DRAWN |
0.3750 |
0.0490 |
MIL-T-8504 AMS5567 |
| 36274 |
SMLS CD 304 6845 1/8 HD 3/8 X .049 |
SEAMLESS & DRAWN |
0.3750 |
0.0490 |
MIL-T-6845 AMS-T-6845 |
| 36237 |
SMLS CD 304 8504 3/8 OD X .035 WA |
SEAMLESS & DRAWN |
0.3750 |
0.0350 |
MIL-T-8504 AMS5567 |
| 36229 |
SMLS CD 304 6845 1/8 HD 3/8 X .035 |
SEAMLESS & DRAWN |
0.3750 |
0.0350 |
MIL-T-6845 AMS-T-6845 |
| 36191 |
SMLS CD 304 8504 3/8 OD X .028 WA |
SEAMLESS & DRAWN |
0.3750 |
0.0280 |
MIL-T-8504 AMS5567 |
| 36183 |
SMLS CD 304 6845 1/8 HD 3/8 X .028 |
SEAMLESS & DRAWN |
0.3750 |
0.0280 |
MIL-T-6845 AMS-T-6845 |
| 36136 |
SMLS CD 304 6845 1/8 HD 3/8 X .020 |
SEAMLESS & DRAWN |
0.3750 |
0.0200 |
MIL-T-6845 AMS-T-6845 |
| 36536 |
SMLS CD 304 6845 1/2 OD X .065 WA |
SEAMLESS & DRAWN |
0.5000 |
0.0650 |
MIL-T-6845 AMS-T-6845 |
| 36513 |
SMLS CD 304 8504 1/2 OD X .049 WA |
SEAMLESS & DRAWN |
0.5000 |
0.0490 |
MIL-T-8504 AMS5567 |
| 36510 |
SMLS CD 304 6845 1/8 HD 1/2 X .049 |
SEAMLESS & DRAWN |
0.5000 |
0.0490 |
MIL-T-6845 AMS-T-6845 |
Stock Size Range:
- OD: 250"- 5"
- Walls:.006"- .250"
- Tempers: 1/8 hard
- Specifications:AMS-T-6845, MIL-T-6845, AMS 5566
| Typical Chemical Composition % |
| Weight % | Ni | Cr | Mn | C | Si | Mo | S | P | Cu |
| Minimum |
8.00 |
18.00 |
|
|
|
|
|
|
|
| Maximum |
10.50 |
20.00 |
2.00 |
.08 |
1.00 |
.75 |
.03 |
.045 |
.75 |
| Typical Mechanical Properties |
| Ultimate |
Yield |
Elongation |
| KSI |
PSI |
|
| 105-140 |
75-110 min |
20% |
304/304L STOCK SIZE RANGE:
- OD: .032"- 5"
- Walls: .006"- .250"
- Tempers: Annealed
- Specifications: MILT 8504, AMS-T-8506, AMS 5560, AMS5567
| Typical Chemical Composition % |
|---|
| Weight % | Ni | Cr | Mn | C | Si | Mo | S | P | Cu |
|---|
| Minimum |
8.00 |
18.00 |
|
|
|
|
|
|
|
|---|
| Maximum |
12.00 |
20.00 |
2.00 |
.08 |
1.00 |
.50 |
.03 |
.045 |
.75 |
|---|
| Typical Mechanical Properties |
|---|
| Nominal OD | Nominal Wall | Ultimate KSI | Yield KSI | Elongation in 2" |
|---|
| .187 and less |
.016 and less |
115 max |
30 |
30 |
|
Over .016 |
75-100 |
30 |
40 |
| Over .187 |
.012 and |
110 max |
30 |
37 |
| To .500 incl |
Less |
|
|
|
|
Over .012 |
75-100 |
30 |
40 |
| Over .500 |
All |
75-100 |
30 |
40 |
