5052 drawn aluminum tubing is a magnesium alloyed aluminum product primarily used in hydraulic tube and appliance applications. This alloy has good corrosion and weld ability characteristics.

SKU	Description	Temper	Manufacture Method	OD	Wall	Specification
41917	D5052-O 3/8 OD X .049 WA	O	DRAWN SEAMLESS NON HYDRAULIC	0.3750	0.0490	AMS4070 ASTM B210
41839	D5052-O 3/8 OD X .035 WA	O	DRAWN SEAMLESS NON HYDRAULIC	0.3750	0.0350	AMS4070 ASTM B210
41776	D5052-O 3/8 OD X .028 WA	O	DRAWN SEAMLESS NON HYDRAULIC	0.3750	0.0280	AMS4070 ASTM B210
42237	D5052-O 1/2 OD X .049 WA	O	DRAWN SEAMLESS NON HYDRAULIC	0.5000	0.0490	AMS4070 ASTM B210
42159	D5052-O 1/2 OD X .035 WA	O	DRAWN SEAMLESS NON HYDRAULIC	0.5000	0.0350	AMS4070 ASTM B210
42086	D5052-O 1/2 OD X .028 WA	O	DRAWN SEAMLESS NON HYDRAULIC	0.5000	0.0280	AMS4070 ASTM B210
42055	D5052-O 1/2 OD X .020 WA	O	DRAWN SEAMLESS NON HYDRAULIC	0.5000	0.0200	AMS4070 ASTM B210
42495	D5052-O 5/8 OD X .049 WA	O	DRAWN SEAMLESS NON HYDRAULIC	0.6250	0.0490	AMS4070 ASTM B210
42428	D5052-O 5/8 OD X .035 WA	O	DRAWN SEAMLESS NON HYDRAULIC	0.6250	0.0350	AMS4070 ASTM B210
42385	D5052-O 5/8 OD X .028 WA	O	DRAWN SEAMLESS NON HYDRAULIC	0.6250	0.0280	AMS4070 ASTM B210

Stock Size Range:

• OD: 1/8" through 4"
• Wall: .020 through .065
• Tempers: O
• Specifications: ASTM B210, AMS 4070, AMS-WWT-700/4

Typical Chemical Composition %
Weight %	Si	Fe	Cu	Mn	Mg	CR	Zn	Each	Total
Minimum					2.20	0.15
Maximum	0.25	0.40	0.10	0.10	2.80	0.35	0.10	0.05	0.15

 

Typical Mechanical Properties
Temper	Tensile					Hardness
	Ultimate		Yield		Elongation	Brinell
	KSI	MPA	KSI	MPA	%
O	28	195	13	90	25	47